Astro lava lamp: polished silver

Open bottom of lamp. The bottom of the lamp had a piece of felt which we just peeled right off: Remove top of lamp. We just unscrewed this round thing nut? Every lamp will be different, but there should be some way to unscrew it and remove the top. This is what they look like when they come in the mail: We used them to light our bookshelves see that tutorial here: The end of the light strip has a red and a black wire and looks like this:

Astro lava lamp: polished silver

Lamps offered at auctions might be trash or may be treasure. The lamp you use daily might also be a valuable item. Determining the worth of any lighting fixture means taking a good look at some obvious clues and doing a bit of research to estimate the value. Don’t assume because it’s old that it’s valuable. The same is true of modern lighting.

It might not meet the traditional definition of years old to claim status as an antique, but that doesn’t mean it isn’t worth a fortune as a collectible.

May 15,  · Can anyone help in dating a Vapalux lamp I picked up over the weekend, I thought it may be a s RAF model but there are no markings on the gallery except a serial number – .

Figuring out which lantern you have is often no more difficult than reading the frame rest. The frame rest is that band right above the lantern’s fount and most lanterns since the s have their model designation stamped there. Dating your lantern can be a little harder. But first let’s cover the different models. If your lantern is newer that the mid s you probably won’t need to read this part. Prior to that, however, there are numerous lanterns without model ID stamped on the frame rest.

Rather than building a flow-chart it will probably be easy to point you in the right direction to figure out what you have. Simply, that right direction is our virtual museum. The most important thing you need to start with is the number of mantles on your lantern. If you have a 2-mantle lantern please refer to the When you think of Coleman to find a match.

The dating site for gay and bisexual men everywhere

By establishing the date of an antique table lamp, you can discover its value or find any replacement parts needed. Start by identifying the style of table lamp you have, such as an Art Nouveau, an Art Deco lamp or a hurricane boudoir lamp, to establish the maker and its age. Maker’s Hallmark One of the first places to look for a date stamp or the maker’s hallmark begins with an examination of the base of the lamp that sits on the table.

Pick up the lamp and look for a manufacturer’s symbol, name or date stamp embedded into the base. Also look on the lighting fixture itself; sometimes, the manufacturer includes a sticker that includes the name, or date of manufacture. Antique Lamps If you have an antique table lamp and cannot find a hallmark, a date stamp or any other identifying feature, locate a collector’s book on lamps to identify the manufacturer, which may help you find the date the lamp was made.

The Antique Lamp Co. on-line catalog of old-style rayon fabric covered cord, plugs, and switches for old lamps.

While you can tell what shape the lamp is in by looking at it, you probably won’t be able to find much manufacturing information on antique oil lamps. The best way to get an exact date of manufacture is by having an appraiser view the lamp. You can also educate yourself on oil lamps that resemble yours to better understand the antique lamp market and the changing styles of lamps throughout time.

Step 1 Inspect your antique oil lamp from all sides, looking for special markings, signatures or other clues to the lamp’s age and manufacturer. These may include stamps, insignia or a manufacturers’ name near the wick winder button. Note any dings, scratches or other markings. Use a magnifying glass to get a closer look.

Ancient Oil Lamp Traced Back to First-Ever Hanukkah in Maccabee Era

Heavily ornamented with Acanthus leaves and dolphins on the three legs. Roman, the lamp and stand possibly not belonging but an excellent fit. The lamp 5 inches, the stand 6 inches tall. Smooth dark black green patina.

A lava lamp or Astro lamp is a decorative novelty item, invented in by British accountant Edward Craven Walker, the founder of the British lighting company Mathmos.

We research leading books and use our expertise to ensure the information is accurate and correct. Please note that this information has not been validated by an external expert and therefore should not be considered a guarantee. Additional pictures will gladly be e-mailed to you upon request should you have an interest in one of our lamps. We are open to negotiating pricing. If a new price is agreed, we will adjust the pricing on our site prior to your purchase.

This lamp has ribbons and flowers throughout the glass. The font has a quilted pattern to the glass. The frame is all matching on the design. Finding matching glass in these lamps is getting more difficult all the time. It has a matching frame with lots of beautiful filigree. It has a Lomax font and a bright shade with flowers and vines rapping around it. It has new prisms, antique No. It has a spot of paint on the canopy.

Identifying lamp manufacturer by the UL number

Double-nozzled terracotta oil lamp found in Samaria The following are the main external parts of a terra-cotta lamp: Shoulder Pouring hole The hole through which fuel is put inside the fuel chamber. The width ranges from 0. There may be single or multiple holes.

Inspect your antique oil lamp from all sides, looking for special markings, signatures or other clues to the lamp’s age and manufacturer. These may include stamps, insignia or a manufacturers’ name near the wick winder button.

Most made after the mid s have a manufacturing date stamped on them, usually on the bottom or the bottom edge of the fount tank. To date your lantern, first make sure the fuel cap is down tight and then turn the lantern upside-down and look at the bottom of the fount. Figure 1 Bottom of Model A lantern, October The most common location and method of date stamping, used since the late s, is just off-center on the very bottom of the fount. You will see two sets of numbers, one set left and one set right of center.

The number, or numbers, on the left indicate the month while the numbers on the right are the last two digits of the year. The Model A lantern in Figure 1 was made in October 10th month of Excessive paint or rust may make the numbers hard to read but if you scratch the area lightly with a sharp instrument you should be able to read the numbers. We do have one exception: A lantern from January of could be stamped A And, the period identified by the letter seems to be longer than a month.

How to Tell if You Have a Lamp That’s Worth Money

The lamps in the exhibit illustrated the history of the oil lamp inAmerica. What follows is a brief synopsis of that history illustrated by a few of the lamps that were on display. The Argand lamps became popular immediately and reached the United Statesat the beginning of the 19th century where continued improvements were introduced over the next 80 years.

The original Argand-type lamp had a large fuel reservoir in a tank as high as the lamp that provided pressure to force fuel into the wick.

Does anyone know the date when the polarized plugs began being used in the US? I’m trying to narrow the dating down on a lamp. This lamp also has a.

They span from the time of the Old Testament to the coming of the Christian movement in ancient Israel. Several of these clay lamps are molded directly from ancient oil lamps. Others are made using ancient motifs on lamp bodies made from a mold of an undecorated original lamp. These reproduction Judean lamps can be used with olive oil like the originals. In antiquity, these developed after a shallow bowl had its edges folded to form a spout. These lamps would have been the style in use in the Old Testament.

Known as the Herodian because of its widespread use during the reign of Herod the Great circa 37 BC to 4 BC , these lamps were typically wheel made with the spout applied by hand. Although mainly confined to the Jerusalem area, they have also been found at Herodian, Masada, and other Jewish settlements in the region.

Mathmos Lava lamp bottles

Early Mantles and their boxes over time There are a lot of pictures on this page, expect a long load time My thanks to John Whitehead who provided many of the pictures used on this page. The best known to Aladdin enthusiasts are the Practicus burners. Unmounted mantles for the Candesco burner used in the ‘s.

lamp identification Below are some of the most common types of antique lamps that we sell replacement shades and parts for here in our website. Perhaps this will also help you identify your lamp and find out more information.

Description and History of Oil Lamps Roman Oil Lamps Defined A lamp is a device that holds and burns fuel, typically oil, as a means of producing light. Although oil lamps have taken on a variety of shapes and sizes throughout history, the basic required components are a wick, fuel, a reservoir for fuel, and an air supply to maintain a flame. Diagram of oil lamp features Westenholz, History Some of the earliest lamps, dating to the Upper Paleolithic, were stones with depressions in which animal fats were likely burned as a source of light.

Shells, such as conch or oyster, were also employed as lamps, and even may have served as the prototype for early lamp forms. Initially, they took the form of a saucer with a floating wick. Soon after, these saucers began to develop a pinched or folded rim which resulted in a nozzle and served the purpose of holding the wick in place, thus controlling the flame as well as the smoke.

As they evolved, clay lamps became more enclosed, moving from a pinched nozzle to a bridged nozzle, and sporting the addition of a rim. These changes aided in reducing the amount of oil lost through spillage. Lamps also began to show signs of experimentation with changes in overall body shape and the addition of multiple nozzles, a handle, and clay slips, a coating that was applied to the outside of clay lamps during production in an effort to prevent oil from seeping through the porous clay.

These technological advances have been accredited to the Greeks, whose lamps were exported all over the Mediterranean between the sixth and fourth centuries BC due to their high quality of craftsmanship. Further enclosure of the lamp body by Roman crafters allowed for more decoration on the discus. They also developed a channel on the nozzle to draw back any oil that dripped from the wick.

Between the first and second centuries AD, Italian lamps became the dominant style in the Roman world.

I Love My Inflatable Animals